Do you want to learn how to connect Kodak printer to a wireless network? If yes, you are on the right path where you can know the detailed step by step procedure to connect a Kodak printer to the wireless network. Hence follow the below procedures.

Method – 1: Try to Connect Kodak Printer to a non-WPS wireless router

• Press on the Home button.
• Go to Network Settings using the right arrow key.
• Now click on the Wi-Fi Setup Wizard.
  NOTE: Whenever you select the WiFi Setup Wizard, the Wi-Fi radio turns on automatically.
• If there is an availability of additional networks that is showing on the screen, click on the upward arrow or down arrow to view them.
• Select on your network name.
  • However, if you want to change your network name or if your network name is not visible on the list Rescan for Wireless Networks.
  • Also, make sure that your wireless router is turned on and within the range in order to view your network name on the list.
• As a next step, if your network is asking you to set a password, use your LCD keyboard to enter the strong Security String. And you should remember that the Security String is case-sensitive. After typing the security string, touch OK
• After that, you will be shown with the confirmation message on the screen, and you should touch OK.

• Then your printer will be connected successfully, and the Wi-Fi connectivity LED will stop blinking and remain lit.
• If you have not installed the KODAK All-in-One Printer Software in your computer follow the below instructions:
  • Go to the Kodak official website.
  • In the results list, click on the link for KODAK All-in-One Printer Software for your own computer’s OS.
  • And you need to follow the on-screen instructions that are visible to you.

Method – 2: Try to Connect Kodak Printer to a WPS wireless router

• Press the home button
• Click on the down arrow and then click on the Network Settings.
• And go to Wi-Fi Setup Wizard.
• And as a next step, go to WPS Connect.
• Here in this step you should press or select the WPS button within two minutes. There are two methods to continue this step i.e., either by using a button on the device or a virtual button in the device’s software.
• You can select either Push Button Configuration or Generate WPS PIN.
  Push Button Configuration
• Go to Push Button Configuration.
• Choose the WPS button for your wireless router.
• And click OK button on the control panel.

Push Button Configuration

• Go to Push Button Configuration.
• Choose the WPS button for your wireless router.
• And click OK button on the control panel.
• Generate WPS PIN
• Select Generate WPS PIN.
• Locate your PIN and Enter the PIN which is received on the LCD into the PIN screen, then follow the router’s instructions.
• Select OK on the control panel.
• After this you can receive a confirmation message, you should touch OK.
  1. Whenever the printer is successfully connected, you should observe that whether the Wi-Fi connectivity LED stops blinking and remains lit or not.
• If you have not installed the KODAK All-in-One Printer Software in your computer, then go to Method – 1 to know how to download the Kodak All in One Software in your computer.

This will help you with your query on How to Connect Kodak Printer to Wireless Network.