Does your Ricoh Printer display an error code SC 899-00? Ricoh printers have this mechanism of fixing the errors using particular error codes that help in identifying the nature of the errors and the different procedures to rectify these errors. When the printer has a damaged or faulty print job which is also known as the PDF document or any website page, the Ricoh printer functional error SC899-00 initiates and halts the tasks of the printer.


A Complete Guide  to fix Ricoh printer functional error SC899-00

It is necessary to update your Adobe reader plugin or add-on to the up-to-date version so that the chances of such errors get reduced to a fairly low level. As if not taken care, this error will not allow the printer to perform its regular functioning. Also, you can switch to some other web browser so that the error probability minimizes manifolds.

Now if you are looking for a solution to how to fix Ricoh printer error SC 899-00you must go on reading further as proper steps have been provided to mitigate this error in an easy way:

Step 1: Start the procedure of troubleshooting by disconnecting the printer networking cord.

Step 2: Switch to the service mode by pressing the following keys in the sequence given: 0, clear, reset, 1, 7 and then keep the clear key pressed until the SP Menu appears.

Step 3: Now click on the System SP key and look into the section named with SP – 5 series and widen it so that you can scroll down to find 5801: Clear Memory option on the screen.

Step 4: After that, you must press on subsection 8 which is also called the Printer application and push the execute key that is present on the screen’s right side. This step will help in clearing all the memory of the printer.

Step 5: Later you will see that a verification message pops up on the screen for which you will need to check the execute option so that you can move to the next step.

Step 6: It is recommended that you do not select subsection 1 which states All clear key as using it, all the accounting codes will get removed from the Ricoh printer.

Step 7: Now that the memory gets cleared, the Ricoh printer will get automatically switched off that will be a sign of saving all the changes that you have made.

Step 8: Now you will see that the error message gets eliminated when the printer is switched on for use and now, you can clear all the tasks from it that lead to such an error.

These steps are helpful in getting rid of the error and to operate the printer as it was before. Although this method is useful in answering how to fix Ricoh printer functional error SC899-00if still there is an issue due to which the printer does not work like before, it is essential that you consult a professional technician to rectify the issue.

Leave a Reply

Your email address will not be published. Required fields are marked *