Of late- Epson has made a mark in the industry by offering the best quality printers. Even though it comes with everything that makes it the best, it is not free from errors and glitches. Hence, it is essential to be aware of the troubleshooting steps for specific Epson printer error Oxea codes.

Epson Printer Error Message

Easy Solution on How To Fix Your Epson Printer Error Message

An error code in the Epson Printers is a numerical representation of the glitch it might be having. Most often these errors are caused due to issues in your computer while some of these errors are quite common to the printer and can be quickly resolved.

Error Code 0x97

Error Code 0x97 depicts a hardware problem with your Epson Printer. Specific printer solution of hardware problems can be hard to detect because there are endless possibilities. Irrelevant to the cause, follow this simple hack to resolve the issue:

  • Turn off your printer and unplug all the Wait for 15-20 minutes and plug everything back again. Clean your printer with a semi-wet cloth to remove the dust accumulated.

Error Code 0xf1

Error Code 0xf1 shows up when you proceed towards a corrupted registry. In simple terms, the printer shows the error when it cannot comprehend the information and becomes disabled to print. Here’s how you can fix it:

  • Turn off your Epson Printer and unplug all the Wait for 15-20 minutes and plug everything back again. Clean your printer with a semi-wet cloth to remove the dust accumulated.
  • Try scanning your computer for a virus or malware to understand the issue better.

 

Error Code 000031

Error code 000031 arises when there is specifically a glitch in the scanner. The error depicts a hardware problem associated with your Epson Printer. Here are some of the fixes you can apply:

  • First and foremostly, you can try to remove the ink cartridge and then install it back in the printer in a correct manner.
  • The second step is to reconfigure your Epson Printer to default. Many times, a wrong setup can be the reason for such errors.

Error Code 0x69

Error Code 0x69 arises when there is a hardware problem. Such errors occur when there is an obstacle in the printer and could potentially be disrupting the mechanics of the printer. You can follow these steps to

  • Carefully open the printer lid and quickly check for obstructions, if any.
  • Remove printer cartridge and re-install correctly.
  • Turn off your Epson Printer and unplug all the Wait for 15-20 minutes and plug everything back again. Clean your printer with a semi-wet cloth to remove the dust accumulated.

Following these steps will help you tackle the error in no time at all. In case you still face difficulties regarding how to fix Epson Printer error message, you can try reaching out to Epson customer support or the manufacturer of the printer!

Leave a Reply

Your email address will not be published. Required fields are marked *