When you are faced with the error C on your HP printer, the message – “Ink Cartridge Carriage Stalled” will be displayed on the computer. On the control panel of the printer, the attention light blinks normally, the ink level indicators blink normally, and the segment display counter displays a ‘C.’ This segment display blinks fast to indicate that your HP 2515 printer has the error C.

Say goodbye to the Query “How to Fix hp 2515 printer error c”

This error is displayed while printing and it means that the printer carriage is stuck and does not move. To know how to fix HP 2515 printer error c, follow the instructions below.

Step 1: Restart the printer. Turn off your printer and wait for 60 seconds before switching it on. Restarting the device solves the error c problem most of the time. After restarting the printer, print a test page. To print a test page, press and hold the Start copy black button and Start copy color button at the same time till it makes some noise. This will start printing a test page. If the test page is not printed, and the error persists, move on to the next step.

Step 2: Clear jammed papers from the tray, base, front and inside of the printer. Firstly, turn off and unplug the device. Remove any paper which is in the device input tray. Look inside the tray to find any paper, clips, dust, hair or any object that might be hindering the printing process. Remove any foreign objects by moving the pick mechanism inside the input tray. Also, remove all the papers which might be stuck in the output tray.

Step 3: Clear jammed paper from the base of the printer. After clearing the tray, turn the device upside down to reveal the base of the printer. The device has a cleanout door present at the base. Simply press the tabs on either side of the door to release it. Open the cleanout door and remove any jammed paper which might be present on the inside.

Step 4: Clear jammed paper from the cartridges. Open the cartridge access door. Look for any shreds of paper which might be disrupting the printing process. Then, re-insert the cartridges and put it back in place.

Step 5: Free the cartridge carriage. Once you have made sure that there are no pieces of paper blocking the printing process, plug the printer again. Now, open the cartridge door of the printer and wait till the carriage is silent and idle. With the printer still on, remove the power cord of the printer from the power source.

Now, move the cartridge and check where it is being stuck. If it is being stuck on either side, apply a little pressure to make sure it is free to move. Grab the cartridge and manually move it freely across to make sure it is free. Shut the access door and plug in the printer to start printing.

Congratulations! You now know how to fix hp 2515 printer error C.

One thought on “How to Fix hp 2515 printer error C

Leave a Reply

Your email address will not be published. Required fields are marked *